Why we created it
People riding aggressively on rocky terrain wish to reduce their inflating pressure for better traction and control, and at the same time they need to avoid “hitting hard”, pinching the tyre casing between the rim and a rock, cutting it and/or damaging the rim. That’s where tyre inserts (anti-pinch-flat inserts, tyre noodles, etc.) can be helpful. These devices fit inside tubeless tyres and absorb a part of the impact, protecting tyre and rim. With TyreInvader we want to offer an excellent yet simple solution, keeping weight and cost low. Learn more about tyre inserts in general in this tech article.
No influence on normal riding
TyreInvader is flat and it will basically come into play only when needed (unlike round inserts that are compressed quite often during normal riding). It’s still better to test ride TyreInvader before racing it.
We don’t suggest to use lighter tyres nor to go incredibly low with inflating pressure: just set you tyres up the way you like them, and don’t worry about pinch flats.
Lightweight
The weights for the different TyreInvaders refer to the product uncut (for 29” wheels), so it’s even lower when adapted to 27.5” or 26” wheels.
TyreInvader 35 = 48 g
TyreInvader 40 = 53 g
TyreInvader 50 = 68 g
TyreInvader 55 = 80 g
TyreInvader 60 = 92 g
Tolerance on nominal weight is + / – 5%
Premium material
TyreInvader is made of high density EVA, a very durable/strong/light foam employed by the sport shoe industry: this material can resist heavy impacts with very little damage. We recommend to check Tyreinvader once a year or after hard riding sessions, and to replace it if needed.
Sealant-optimized
EVA has a closed-cell structure that cannot absorb any sealant.
Additionally, the cut-outs of TyreInvader allow the sealant to easily move around, to make sure punctures can be quickly fixed.
As inserts have surfaces that are wetted by the sealant, a fraction of it won’t be available to move around to do its job. For this reason, also with TyreInvader we recommend to slightly increase the quantity of sealant normally employed, by 30 ml.
TyreInvader has been designed to function with our Caffélatex sealant, ammonia free.
Easy to assemble and mount
Just cut TyreInvader following the instructions (for 27.5” and 26”; no need to cut for 29”), join its two ends with the two (provided) zip-ties, mount it inside the tyre (it will stretch a little bit to fit the diameter… no worries), add sealant, go ride. Our Tech Videos can help clear any doubt.
Real run flat behaviour
TyreInvader has been sized to sit tightly on the rim, so that – in case of emergency – it will push the tyre against the rim, allowing the rider to finish the run or ride until it’s safe to stop. This should be considered an exceptional functioning mode, as we don’t recommend you ride with TyreInvader at zero pressure.
Compatible with any tubeless valve
The shape of TyreInvader prevents it for sitting over the valve base, on most rims. To make sure it doesn’t happen on any rim, TyreInvader has an open slot, to be positioned over the valve.
Functional packaging
TyreInvader is sold in pairs (so 2 pcs per pack, including 4 zip-ties), inside a transparent bag. That bag can be folded and carried inside your backpack, in case you want to remove your TyreInvader and store it, without worrying about sealant stains. Or you can simply use the bag for shopping and /or carrying stuff.
What about the little aliens and the arcade font?
Who doesn’t remember SpaceInvaders? If you don’t, it means you’re too young, but you can still enjoy some of that thanks to retrogaming. Besides, our product is actually invading the tyre, thus “TyreInvader”.
The cut-outs serve several purposes: to save weight, to allow easy sealant flow and… to offer some cool branding/styling opportunities. #tyreinvader #nevergameover
TyreInvader is Made in Italy
Road.cc
Verdict: “Good rim protection from an easy to install and affordable insert” – road.cc
Review Here
MTB Mag
At the end of the day I’d rate the Tyreinvaders as the minimalist’s inserts. They’re lightweight, but fairly effective and don’t change your bike’s ride too dramatically. At around half the cost of the average inserts, the price is very good and they offer a nice range of sizes and widths for every wheel size and rim width respectively.
Review
MTB VCO
Overall it is a product that we to those bikers looking for an additional product for the protection or rims and tyres (latex is often not enough against cuts), at the lowest possible weight, keeping the driving sensations that are almost unaltered have with using inserts.
Review
EBIKE MAG
The assembly of Tyreinvader proved to be very simple and quick, it was not necessary to use the tire chasers or the compressor to heel the tire on the rim.
Review
Cyclinside
Why is Tire Invader successful? Because thanks to the research of Mariposa Effect it results a "clean" and simple to use product (it does not even absorb the anti-puncture liquid that is put in the cover).
Review
Singtracks
Given the invisible nature of the Tyreinvader inserts, I will be riding with them for the foreseeable future. They cut the likelihood of flats and cracks, and give minimal hassle to mount up.
Review
MTB Test Central
It is therefore a very light and cheap anti-pinch insert, easy to install and also to be removed if necessary, probably also lasting as a material.
Review
43 Ride
Review