Kinesis Dropouts and Mech Hangers - Upgrade Bikes - Upgrade Bikes



Dropout for Kinesis Range eBike.
This Kinesis mech hanger is designed to fit the Range ebike.



Dropout for Kinesis Rise E-MTB
Kinesis mech hanger to fit the Rise electric mountain bike



Dropout for Kinesis G2 Bike

Kinesis Mech Hanger to fit the Kinesis G2 and R1 Bikes.



Dropout for Kinesis Tripster ATR V1

Due to a number of production changes there are a few different dropouts for the Tripster ATR. They look similar but they are not cross compatible.

Please note: The Tripster ATR v2 uses an all new hanger system. Please visit the Trispter V2 hanger page for replacements

Please reference your frame number (located on the BB shell) against the list below


WT-12120052 to WT-12120111, WT1309016 to WT1309047, TRIP401001 to TRIP401090

Use Dropout 9


TRIP407001 to TRIP407080

use Dropout 11 Type 2


TRIP410001 to TRIP410070

Use Dropout 11 Type 3


All frame numbers starting TRIP5 or TRIP6

Use Dropout 11 Type 4



The Kinesis Tripster ATR Ti V2 Dropout is designed for Kinesis Tripster ATR Ti V2


Adapt your Version 2 Tripster ATR with the choice of;

135mm Quick Release dropouts

or

142x12mm Bolt Through dropouts.



Replacement hanger for GF_Ti Disc frames

The Kinesis GF Ti Disc dropout is machined from aluminium, please note image is for illustration purposes only



Kinesis Dropout Adapter for 4S Disc and CX Race frames

Converts rear axle spacing from 135 to 130mm

4x M3x6 countersunk bolts included



Our Kinesis Sync frame shares the same hanger as the carbon Pivot frames.


Use the standard 12x142mm Kinesis Sync Dropout version for use with a standard derailleur

Use the direct mount hanger with a Shimano Shadow derailleur (B-link removed) for ultimate shifting performance



Kinesis Dropout 3

This mech hanger fits:
Racelight - T, T2 (not complete bike), T3, TK, TK2, TK3, 4S, KR210
Crosslight - T, T2, T3, T4, FiveT, Pro, Pro2, Pro3, Pro4, Pro5 (5T Disc is Dropout 10)



Kinesis Dropout 4

This mech hanger fits:
Racelight - Gran Fondo (Scandium version only), KT415, KR510, RC, KiC Crosslight - EVO, EVO2, EVO3, EVO4, EVO5



Kinesis Dropout 8

This mech hanger is designed to fit the Kinesis Tripster aluminium frame (not the Tripster ACE bike)



Kinesis Dropout 10

This mech hanger fits:
Racelight - Aithein
Crosslight - FiveT Disc (rim brake version uses Dropout 3)



Kinesis Dropout 12

This mech hanger fits:

Aithein Disc (QR Version).
4S Disc (QR Version).
CX Race (QR Version).
CX1.
Pro6 v2.

Please note: this dropout will not work on the following:

Aithein rim brake - requires Dropout 10.
Pro6 v1 - requires Dropout 7.
CX Race with Thru Axle - requires Dropout 15.
4S rim brake - requires Dropout 3.
4S Disc with Thru Axle - requires Dropout 15.



Kinesis Dropout 13 Mech hanger to fit our current Kinesis Phase frames

Please note: this does not fit our earlier 2008 'Pha5e' frames. They require dropout Dropout 1



Kinesis dropout 14 to fit our T2 complete bike

Please note: This mech hanger will not work with our T2 frameset



Kinesis Dropout 15 to fit the following Kinesis frames:

CX Race Evo.
CX Race 2020.
RTD .
Tripster AT.
4S Disc (Thru Axle version).
Aithein Disc (Thru Axle version).

Please Note: For the 4S Disc, Aithein Disc and CX Race with QR mech hangers, you will need Dropout 12.



The Kinesis Tripster ATR Ti V2 Dropout is designed for Kinesis Tripster ATR Ti V2



The Kinesis Tripster ATR Ti V2 Dropout is designed for Kinesis Tripster ATR Ti V2



Kinesis Dropout 18

This mech hanger fits the Kinesis Maxlight X frames.



Kinesis Dropout 19

This mech hanger fits the Kinesis GTD and Tripster ATR Ti Vol.3 framesets.



Kinesis Tripster ACE dropout mech hanger to fit our Tripster Ace complete bikes

Please note: not compatible with our Tripster ATR or Decade Tripster frames



The Kinesis UK Virsa and Convert come equipped as standard with this Swopout. A 10mm vertical dropout with mech hanger. A direct replacement for your standard Swopout if you have an unfortunate stack.

The horizontal dropouts for the Convert and Virsa are no longer made. You can run the DMR MK2 horizontal dropout in these frames but only with a 130mm hub in the Convert and 135mm hub in the Virsa

NB The Kinesis Virsa / Convert dropout is for the Kinesis Virsa or Convert frame only Swopout Dropouts. These will not work for frames using MK1, MK1.5 or MK2 DMR Swopout Dropouts.



M12x1.5tpi Thru Axle Nut.

5 grams approximately.

Tighten to 20Nm.



KUK - Fork Axle Shim Spacer - 12mm

Alloy shim to secure 12mm through axle into the Kinesis ATR fork.

KUK - Fork Axle Kit - 12mm

Alloy shim, plain bore internally threaded nut and 12x133B axle to secure 12mm through axle into the Kinesis ATR fork.



100 x 12 GW 120mm Axle

Lightweight 7075 aluminium hollow shaft 12mm Thru axle.
120mm overall length.
13mm thread length.
M12 x 1.5mm thread pitch.



100 x 12 GW 132mm Axle

Lightweight 7075 aluminium hollow shaft 12mm Thru axle.
132mm overall length.
15mm thread length.
M12 x 1.5mm thread pitch.



142 x 12 GW 163mm Axle

Lightweight 7075 aluminium hollow shaft 12mm Thru axle.
163mm overall length.
15mm thread length.
M12 x 1.5mm thread pitch.



142 x 12 GW 168mm Axle

Lightweight 7075 aluminium hollow shaft 12mm Thru axle.
168mm overall length.
15mm thread length.
M12 x 1.5mm thread pitch.



GW Switch Lever

Replacement Switch Lever for our Switch Lever Axles.


Upgrade Bikes would like to place cookies on your computer to help us improve the website. For more information about what cookies are and why we use them please see our Cookie Policy.